1994 mazda rx7 for sale - SOLD

[2MCHPWR]

This is begging for an LS1 swap

Year: 1994
Make: Mazda
Model: RX-7
Price: $11,500
Mileage: 116000
Color: Chaste White
Private or Dealer Listing: Private Listing
Location: NY

I was going to bring it back to stock for AS class and also convert to manual transmission. I can help source the items because my friend has a rotary shop and has most of the parts necessary for the manual swap.

Runs great! AC is cold.
Body is excellent except for the small cracked paint on front bumper.
Very rare color/combo.
Black interior; desirable cloth seats.
The only mods are a Koni adjustable shocks and PFS 3" cat-back exhaust.

I spent a lot of $$$ to get this running like a perfect stock rx7. Twin turbo sequential setup runs strong.

Thanks.
pics:
http://209.177.55.37/tempimages/whitefd7.jpg

http://209.177.55.37/tempimages/whitefd17.jpg

http://209.177.55.37/tempimages/whitefd11.jpg

http://209.177.55.37/tempimages/whitefd16.jpg

[Rich2279]

Nice looking car. Any engine pics?

[2MCHPWR]

sure

[2MCHPWR]

short vid but not so good:

http://www.youtube.com/watch?v=oCEdc9_TaZA

[2MCHPWR]

Just had the car thoroughly inspected by Ihor and RIch's shop and had the following fixes done:
Rotary engine compression test
Replace engine oil and filter
Install new spark plugs
Replace ignition wires
Remove aftermarket bov and install stock bov
5 Vacuum hose replacement and tie job
2 Replace oil metering lines
1 Replace fuel pulsation damper and associated fuel hoses
5 Re-seal oil pan and install reinforcement brace
3 Replace and relocate fuel filter
1 Replace coolant and flush system
.5 Replace differential gear oil
1 Re-install stock intake, intercooler duct, and battery box
1 Replace front stabilizer end links, bushings, and mounts
Replace power steering hose
1 New OEM Mazda FD Oil Pan
1 Oil pan reinforcement brace 13brew and hardware kit
1 motor mount with steel arm, good condition
Hose Techniques silicone vacuum hose, black
1 Mazda OEM fuel pulsation damper
6 5/16" high pressure fuel injection hose
FD primary fuel injector insulator
1 Mazda OEM Fuel Filter
5 10w30 mineral motor oil, 1qt
1 Oil Filter, Mazda RX-7
2.5 Premium Coolant
1 Mazda oem water hose, from rear iron
1 Mazda oem water hose, behind alternator
1 HOSE/WATER throttle body
1 Mazda oem coolant hose, filler to overflow
1 Filler neck to ast hose, fd
1 ast hose
4 NGK spark plugs
1 Mazda OEM NGK ignition wire set, fd
1 Stainless steel oil metering lines
2 Mazda OEM Oil Injector
3 good condition sequential turbo solenoid
2 FD OEM Mazda Front Sway Bar Bushing
1 FD OEM Mazda Front Sway Bar End Link, Driver Side
1 FD OEM Mazda Front Sway Bar End Link, Passenger Side
1 FD OEM Mazda Sway Bar/Radiator Mount, Driver Side
1 FD OEM Mazda Sway Bar/Radiator Mount, Passenger Side
1 Mazda OEM AST and cap
1 Power steering pump to reservoir suction hose, fd
1 Oil level sender o-ring, fd
1 Oil Filler Neck O-ring, mazda oem
3 Idemitsu 75w90 Synthetic Gear Oil
1 Idler pulley with bearing, fd

And getting it professionally detailed this week.

[2MCHPWR]

got the car detailed today; inside and out. looks amazing. pics don't do it justice

[Raist103]

nice car, the color combo i want but i need a stick

[2MCHPWR]

I have a line on manual conversion for $850. includes rebuilt tranny, clutch, flywheel, PP, master and slave cylinder, brake and clutch pedal assemblies, manual tranny ECU.

[2MCHPWR]

drove it today and was pleasantly surprised at how nicely it pulls. Hit 100 mph easy. made 10 lbs of boost:

http://www.youtube.com/watch?v=Iubu-Vygkmk

[2MCHPWR]

bought new toy.
this has got to go.
give me some offers.
thanks.

[2MCHPWR]

ebay baby

http://cgi.ebay.com/ebaymotors/ws/eB...;3AMESELX%3AIT

[Rich2279]

How much % and other fees does ebay take?

[2MCHPWR]

i sold that 1970 camaro and it was like $140 in charges to sell the car

[2MCHPWR]

sold thanks.