Today's Posts Mark Forums Read Calendar
Go Back   NJFBOA - Home of New Jersey's Camaros and Firebirds > Classified Forums > Classifieds Forums > For Sale - Automotive Parts

Notices


Closed Thread
 
Thread Tools
Old 12-01-2013, 10:06 AM   #1
KirkEvil
10 Second Club
 
KirkEvil's Avatar
 
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
iTrader: (11)
LSX Street/Strip Part Out +

Parting out my 2000 camaro, located in 07719. All parts are used unless noted otherwise. Everything listed is already stripped from the car, so please bare with me in getting pics up once I sort it all. I can ship small parts but large, heavy, or delicate things will need to be picked up.

LIST UPDATED 2-19-14


$25 - Felpro Valve seals BNIB
$55 - Valve covers, bolts, gaskets
$215 - LS1 rockers w/ comp trunion upgrade (Newly Assembled)
$80 - Comp Cams chromoly 7.375” pushrods
$140 - ASP 25% underdrive pulley, belt for stock alt pulley
$45 - TCS/cruise delete throttle cable
$175 - TSP 100mm LS7 MAF, 3 to 5 pin adapter, 4” silicone coupler
$30 - Spectre 4” black cone filter, 4” couplers, 4” Al tubing
$200 - Hooker Aerochamber catback, 3” cutout welded to front of I pipe, 3x6 oval tips
$350 - OEM 4L60E, HD2 kit full race drilled and shimmed, .060” VB plate, vette servo, push-lok fittings, HP line, B&M 14.4k race cooler, and fittings. I recommend you have a 3600+ rpm converter if you plan to drive this on the street.
$50 - Steering column
$200 - UMI 1.25” solid drag bar and adj end links, pc flaking, U bolt mounts for stock rear axle tubes
$200/pair - LS1 Front brakes, powerslot rotors, Hawk HP pads, braided lines, calipers painted black
$75 - SJM line lock, pre-bent lines, prop valve
$40/pair - camaro sideview power mirrors, pewter
$250 - Kirkey pro drag 17” hip, kirkey seat brackets, cloth cover (Sat in for ~20 miles)
$15/ea - x2 Wolfe 5pt harness crotch strap floor mounts
$400 - VFN 3” SS hood, drilled for hood pins, surface prepped. Includes black hood pin studs and 5 chrome flip pins. Can be mounted with stock hood latch assembly too.
$60 - Factory gloss black berger panel, hole drilled under PS light for kill stick
$60/pair - x2 Ttops
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?

Last edited by KirkEvil; 02-19-2014 at 08:10 PM. Reason: BECAUSE RACECAR
KirkEvil is offline  
Old 12-01-2013, 10:07 AM   #2
KirkEvil
10 Second Club
 
KirkEvil's Avatar
 
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
iTrader: (11)
Vinyl wrapped flat black, started to lift around the scoop so I removed it, see below.
















__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?

Last edited by KirkEvil; 02-07-2014 at 06:02 PM. Reason: BECAUSE RACECAR
KirkEvil is offline  
Old 12-01-2013, 10:08 AM   #3
KirkEvil
10 Second Club
 
KirkEvil's Avatar
 
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
iTrader: (11)


















__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?

Last edited by KirkEvil; 02-11-2014 at 05:33 PM. Reason: BECAUSE RACECAR
KirkEvil is offline  
Old 12-01-2013, 11:36 AM   #4
NJ Torque
11 Second Club
 
NJ Torque's Avatar
 
Join Date: Feb 2008
Location: Edison, NJ
Posts: 4,619
iTrader: (29)
Social Networks:

Rear drag shocks, front shocks/springs, walbro with Hotwire kiy(don't need the tank), pictures of the grill?

CD player or just radio?

Thanks. 732 535 2162
__________________
1999 Z28 Convertible. 6 speed swap, wide cowl hood, full hockey stripes, and a whining 10 bolt.

2008 Sierra Vortec Max. 6.2 swapped, headers, Magnaflow catback, GMPP CAI, NHT optioned tow package.

2006 GTO, 11.48 @ 118.3
NJ Torque is offline  
Old 12-01-2013, 02:07 PM   #5
SilverDropTop
 
Join Date: Apr 2008
Location: Staten Island, NY
Posts: 252
iTrader: (2)
Pm sent.
__________________
2019 Satin Steel Metallic Cadillac Escalade ESV Sport
2010 Radiant Silver Cadillac CTS Wagon
2007 Blue Silverado Max LTZ CCSB 4x4
SilverDropTop is offline  
Old 12-01-2013, 04:19 PM   #6
WayFast84
 
WayFast84's Avatar
 
Join Date: Nov 2005
Location: Edison
Posts: 7,855
iTrader: (7)
Pm sent.
__________________
1984 Firebird
2000 Z28
WayFast84 is offline  
Old 12-01-2013, 04:56 PM   #7
LTb1ow
Mongo the Meet Coordinator
 
LTb1ow's Avatar
 
Join Date: May 2008
Posts: 16,892
iTrader: (8)
LS7 lifters, pictures of box in?
__________________
Quote:
Originally Posted by KirkEvil View Post
repo bigals turd gen and part it out to a loving home
LTb1ow is offline  
Old 12-01-2013, 05:40 PM   #8
KirkEvil
10 Second Club
 
KirkEvil's Avatar
 
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
iTrader: (11)
All PMs replied

Quote:
Originally Posted by LTb1ow View Post
LS7 lifters, pictures of box in?
Just for you, grimmace
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?

Last edited by KirkEvil; 01-06-2014 at 09:24 PM.
KirkEvil is offline  
Old 12-01-2013, 05:42 PM   #9
LTb1ow
Mongo the Meet Coordinator
 
LTb1ow's Avatar
 
Join Date: May 2008
Posts: 16,892
iTrader: (8)
I will take em, add em to my tab broski.
__________________
Quote:
Originally Posted by KirkEvil View Post
repo bigals turd gen and part it out to a loving home
LTb1ow is offline  
Old 12-01-2013, 10:18 PM   #10
V
Stalker
 
V's Avatar
 
Join Date: Aug 2004
Posts: 12,077
iTrader: (12)
ls1 crank?
V is offline  
Old 12-01-2013, 10:24 PM   #11
KirkEvil
10 Second Club
 
KirkEvil's Avatar
 
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
iTrader: (11)
Quote:
Originally Posted by V View Post
ls1 crank?
I should get to tearing the motor apart sometime late this week, but yes that will be listed. Theres a TON of miscellaneous stuff so ask if you dont see what you're looking for.
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
KirkEvil is offline  
Old 12-02-2013, 01:21 PM   #12
Camarokid08731
 
Camarokid08731's Avatar
 
Join Date: Aug 2008
Location: Manahawkin
Posts: 83
iTrader: (1)
can i see pics of the hood? onebadz28@gmail.com
__________________


99 Z28 Boltons 2 stages
88 Camaro 350 TBI swap

Last edited by Camarokid08731; 12-02-2013 at 01:21 PM.
Camarokid08731 is offline  
Old 12-02-2013, 03:10 PM   #13
qwikz28
13 Second Club / Moderator
 
qwikz28's Avatar
 
Join Date: Jan 2005
Location: Franklin Lakes, NJ
Posts: 8,683
iTrader: (6)
Social Networks:

Is the K-member the Road race version?
__________________
Quote:
Originally Posted by LS1ow View Post
Except Jersey mike, great kid, but the way he looks at me makes me feel like im in danger
qwikz28 is offline  
Old 12-02-2013, 07:24 PM   #14
KirkEvil
10 Second Club
 
KirkEvil's Avatar
 
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
iTrader: (11)
Quote:
Originally Posted by Camarokid08731 View Post
can i see pics of the hood? onebadz28@gmail.com
Pictures are up. I forgot to mention that the hood can be mounted with the stock latch assembly. I can include the hood pin rods and a bunch of pins if anyone wants to run them for "show" but use the stock latch.

Quote:
Originally Posted by qwikz28 View Post
Is the K-member the Road race version?
The K is the regular version, UMI P/N 2320
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
KirkEvil is offline  
Old 12-02-2013, 07:58 PM   #15
Blackbirdws6
Lord of the rings / 10 Second Club / Meet Coordinator
 
Blackbirdws6's Avatar
 
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,351
iTrader: (3)
Headlights have Morimoto Bixenon MH1 5.0 projectors, genuine Morimoto 35W ballasts and 5000k lamps. I sell this setup new for $575 new plus shipping. The ballasts and lamps are still under warranty for another three years as well.
__________________

97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140

'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
Blackbirdws6 is offline  
Old 12-03-2013, 12:49 PM   #16
DadsZ28
11 Second Club
 
DadsZ28's Avatar
 
Join Date: Dec 2006
Location: deptford,n.j.
Posts: 437
iTrader: (0)
Is the y-pipe catted or the off road one?
__________________
2000 Z28 red auto 3.23 gears lid and filter, cut-out and a tune, Vig3200, LS6 intake, ftra, baby cam,headers. best et 11.49@117.29 1.57 60ft. with skinnies. sold 6/16.

2010 Camaro SS red jewell tint coat.
DadsZ28 is offline  
Old 12-03-2013, 12:56 PM   #17
KirkEvil
10 Second Club
 
KirkEvil's Avatar
 
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
iTrader: (11)
Quote:
Originally Posted by DadsZ28 View Post
Is the y-pipe catted or the off road one?
Its the off road Y. i would like to sell the headers and y together since they match up perfect, but I could weld in ss cats if you have them ans want the whole system.
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
KirkEvil is offline  
Old 12-03-2013, 01:19 PM   #18
The_Bishop
Power Member
 
The_Bishop's Avatar
 
Join Date: Sep 2008
Location: Hackettstown, NJ
Posts: 1,631
iTrader: (3)
Kirk, I'll grab those coil packs. PM me with shipping costs?
__________________
1998 Z-28 - SLP lid - Ported TB - LS6 Intake - Dynatech SS headers/Catted Y - Magnaflow Exh - 3.42 - Yank SS3600 - UMI weld-in subframe connectors, Adj LCA, Adj PHB, Q1A TA - Bolt-in Relocation Brackets - Strano springs - Koni shocks - 17" C6Z06 wheels - 326HP/335ft-lbs - 12.35 @ 110.41

Quote:
Originally Posted by Blackbirdws6 View Post
I can appreciate a dream but this person needed some real friends.

Last edited by The_Bishop; 12-03-2013 at 01:21 PM.
The_Bishop is offline  
Old 12-03-2013, 05:21 PM   #19
KirkEvil
10 Second Club
 
KirkEvil's Avatar
 
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
iTrader: (11)
Quote:
Originally Posted by The_Bishop View Post
Kirk, I'll grab those coil packs. PM me with shipping costs?
PM'd
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
KirkEvil is offline  
Old 12-03-2013, 06:02 PM   #20
DadsZ28
11 Second Club
 
DadsZ28's Avatar
 
Join Date: Dec 2006
Location: deptford,n.j.
Posts: 437
iTrader: (0)
Quote:
Originally Posted by KirkEvil View Post
Its the off road Y. i would like to sell the headers and y together since they match up perfect, but I could weld in ss cats if you have them ans want the whole system.
Ok thanx but was looking for the catted y......alot of nice parts you have there, no doubt they will sell. Getting into a c5 huh?
__________________
2000 Z28 red auto 3.23 gears lid and filter, cut-out and a tune, Vig3200, LS6 intake, ftra, baby cam,headers. best et 11.49@117.29 1.57 60ft. with skinnies. sold 6/16.

2010 Camaro SS red jewell tint coat.
DadsZ28 is offline  
Old 12-03-2013, 06:46 PM   #21
KirkEvil
10 Second Club
 
KirkEvil's Avatar
 
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
iTrader: (11)
Quote:
Originally Posted by DadsZ28 View Post
Ok thanx but was looking for the catted y......alot of nice parts you have there, no doubt they will sell. Getting into a c5 huh?
Yes, I would like to get into a c5 and go right to a FI build instead of getting stuck around the 460-500 hp NA barrier again. Everything about my camaro was setup for NA so it would have taken too much to make the switch. I decided a partout and transition to a new platform would be best.

I have no doubt everything here will sell, especially when I release the list on ls1tech. Just figured Id give the NJ guys first grabs. Let me know if you change your mind on the headers and Y...1 7/8 would go nice with a nitrous shot to put you well into the 10s
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
KirkEvil is offline  
Old 12-04-2013, 08:19 PM   #22
KirkEvil
10 Second Club
 
KirkEvil's Avatar
 
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
iTrader: (11)
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
KirkEvil is offline  
Old 12-08-2013, 09:26 AM   #23
KirkEvil
10 Second Club
 
KirkEvil's Avatar
 
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
iTrader: (11)
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
KirkEvil is offline  
Old 12-08-2013, 10:51 AM   #24
WSex
 
WSex's Avatar
 
Join Date: Mar 2012
Location: Harrison NJ
Posts: 880
iTrader: (6)
What's the deal with the cage? 9734459231


Edit. I'm sure you can neatly cut the welds. Info on cage? Original Weld on? Or bolt in welded. How many points? 4 right?
__________________
Quote:
Originally Posted by LTb1ow View Post
In all honesty, unless you have some weird addiction to your motor, go LSX. It will be cheaper, easier, and actually be able to be tuned.

Last edited by WSex; 12-08-2013 at 10:56 AM.
WSex is offline  
Old 12-08-2013, 11:05 AM   #25
KirkEvil
10 Second Club
 
KirkEvil's Avatar
 
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
iTrader: (11)
Quote:
Originally Posted by WSex View Post
What's the deal with the cage? 9734459231


Edit. I'm sure you can neatly cut the welds. Info on cage? Original Weld on? Or bolt in welded. How many points? 4 right?
Sent you a text. Its a wolfe 6 point chromemoly roll bar, straight rear bars. Its was fully tig welded into my car and the ds/ps door bars were flipped so there would be more seat room - you would need to run the aluminum door panels I have for sale to clear them.

The bar could probably be cut out and jig notched to refit another car, but I really dont think it would be worth the effort.
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
KirkEvil is offline  
Closed Thread

  NJFBOA - Home of New Jersey's Camaros and Firebirds > Classified Forums > Classifieds Forums > For Sale - Automotive Parts

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Sponsor List














All times are GMT -5. The time now is 08:18 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.