Im trying to clear out the last few parts from my camaro so I have fall fabrication room in the garage
Everything is located in Belmar 07719 for pickup or I can ship the small parts
$300 Picked Up - VFN 3" SS hood, has all provisions to bolt on like the stock hood, but it is also drilled for hood pins. Including hood pins that could be run functionally or for show. Has a small void on the passenger top corner shown in pics. Hood is still bare from VFN, great structure compared to other aftermarket hoods, and weighs ~20lbs.
SOLD! - LS1 Brakes complete with spindles (Pair). Powerslot rotors, Hawk HP pads, SS braided lines, extended ARP racing studs, calipers have been ground down to clear 15" drag wheels and painted black.
SOLD! - 4L60E with a transgo HD2 shift kit, thicker transgo VB plate, drilled and shimmed for full race shiftness, vette servo, B&M plate trans cooler, pushlok line, all fittings, trans cross member, and Poly Trans mount. Shifts are extremely firm and crisp. I recommend you have at least a 3600+rpm converter to run this on the street and keep your spleen intact.
$40 shipped SJM line lock, pre-bent lines, and prop valve. Black paint is flaking off, otherwise perfect.
$40 Picked Up - Berger Panel rear center section, painted factory gloss black 8/10. It has a hole drilled in it under the passenger light for a battery kill stick.
