|
12-11-2014, 02:11 PM
|
#1
|
Stalker
Join Date: Aug 2004
Posts: 12,077
|
Free stuff and Cheap stuff
I haven't been on the forums for a while, my father recently passed away, and now I'm very motivated to get rid of some stuff. I don't even know what I really have anymore since I rarely get over to where all my parts are stored. But heres some stuff that I know of that needs to go. The free stuff will end up in the trash before the New Year since I'll be getting a dumpster dropped off sometime after Dec 19th.
Free:
-1994 firebird TA dash shell,
one small crack by driver air vent, maybe an inch
-Cloth camaro seats, typical black/grey style, decent shape, 2 sets of rear seats included, use the best throw out the other.
Cheap
-95-04 Blazer 2 door headliner, (NO sunroof) dark grey.
$20
-94-04 S10 95-04 Blazer(2 door) front passenger door shell, black
$20
-93-97 camaro fender
$25 each (have a few)
-93-97 headlight bar, bare
$10
-93-02 camaro rear bumper
$20
-93-97 front bumper
$40
-98-02 pewter camaro hood
$50
-91-92 camaro fender driver black (NICE shape, been off car for 10+ years)
$40
-1994 metal trans am gas tank, with pump and sender, car was running fine when removed.
$40
-1999 v6 3.8L auto trans, from camaro 107k miles, car was wrecked drivetrain was good. trans only.
$25
-1994 v6 3.4L auto trans. same deal, car frame was bent, 122k miles.
$15
-TH-350 trans, i don't know much about it , had it 10+ years, been painted silver by previous owner for build.
$20
-1998+ style 5 spoke z28 wheels(not zr1s) set of 4 with center caps, 2 with decent tires.
$75
-93-02 f-body windshield
$80
-1996 Bronco rear tailgate glass
$10
-brand new Ford 80-96 f-series/bronco quad shock brackets, upper and lower,
$20
I also have a ton of interior panels for 4th gens, mainly light grey and graphite. Dash parts and switches, gauge clusters, etc.
Other random wheels.
Oh and I have a 98 z28 parts car that some parts can be pulled off of if there's a specific item needed. The engine/trans/wiring/ecm/accessories are NOT available at this time. That car will be fully stripped and junked by new years. 1/4 panels and sail/roof panel(no bubbles) MAY be cut off and available.
Last edited by V; 12-20-2014 at 02:46 PM.
|
|
|
12-11-2014, 04:22 PM
|
#2
|
Join Date: Feb 2012
Posts: 1
|
Hey interested in picking up the Camaro seats. Where are you located
|
|
|
12-11-2014, 04:48 PM
|
#3
|
Join Date: May 2012
Location: Bridgewater, NJ
Posts: 835
|
Sorry to hear about the loss of your dad.
Send me a PM when you are ready to unload some 3rd gen stuff.
__________________
1984 Camaro: 350 Auto, Global West Suspension, Baer Brakes, CTW Wheels
1989 GTA: Bolt-on L98. Global West Suspension, full Magnaflow exhaust, Wilwood Brakes, CTW Wheels
|
|
|
12-11-2014, 08:54 PM
|
#4
|
Join Date: May 2009
Location: Highland Mills, NY
Posts: 1,915
|
Sorry to hear Paul I can't even imagine
But....... I am looking for front spindles for a 2000 camaro. Both left and right. Don't need the brakes hubs or anything else. Going to be completely redone for my CTS v brakes
__________________
2000 Camaro SS 610rwhp/570rwtq LS2 440, 12 bolt 3.73, tranzilla t56
Last edited by MyFirstZ; 12-11-2014 at 08:57 PM.
|
|
|
12-11-2014, 10:02 PM
|
#5
|
Stalker
Join Date: Aug 2004
Posts: 12,077
|
Quote:
Originally Posted by birdmanjr
Hey interested in picking up the Camaro seats. Where are you located
|
Parts are located in Closter, NJ. zip 07624
Quote:
Originally Posted by Paul Huryk
Send me a PM when you are ready to unload some 3rd gen stuff.
|
Thank you.
What parts are you exactly looking for? I may have certain things that are buried among the hundreds of parts I have stockpiled. Its been a while since I parted a 3rd gen so I really don't know what I have.
Quote:
Originally Posted by MyFirstZ
I am looking for front spindles for a 2000 camaro. Both left and right. Don't need the brakes hubs or anything else. Going to be completely redone for my CTS v brakes
|
Thank you as well.
I have the spindles from a 99 v6 car(should be same as any ls1, or otherwise a set from the 98 z28). I'd take $20 for the pair. (the '99 ones I could have available basically whenever, the '98 ones are still on the car which I need to keep rolling for at least 2 more weeks.)
|
|
|
12-12-2014, 08:02 AM
|
#6
|
Join Date: May 2012
Location: Bridgewater, NJ
Posts: 835
|
Quote:
Originally Posted by V
Thank you.
What parts are you exactly looking for? I may have certain things that are buried among the hundreds of parts I have stockpiled. Its been a while since I parted a 3rd gen so I really don't know what I have.
|
89 and up disc rears
Full interiors (minus dash)
Electric fan setups
__________________
1984 Camaro: 350 Auto, Global West Suspension, Baer Brakes, CTW Wheels
1989 GTA: Bolt-on L98. Global West Suspension, full Magnaflow exhaust, Wilwood Brakes, CTW Wheels
|
|
|
12-14-2014, 08:57 AM
|
#7
|
Join Date: May 2009
Location: Highland Mills, NY
Posts: 1,915
|
I'm in no rush for them. But yeah I'll take them. My ctsv calipers came in and won't go on till spring with those. I'll come by some time in early January when I'm at my parents in pearl river.
__________________
2000 Camaro SS 610rwhp/570rwtq LS2 440, 12 bolt 3.73, tranzilla t56
|
|
|
12-14-2014, 12:51 PM
|
#8
|
Stalker
Join Date: Aug 2004
Posts: 12,077
|
Paul, I don't have any 3rd gen disc rears currently, and I'm unsure about interiors right now, and i may have a dual electric fan setup or two laying around, ill look.
Anthony, ok, ill put a set aside for you.
Any more interest in the free parts? I'll be ordering the dumpster tomorrow and probably throwing stuff away on thursday/friday/saturday and obviously I'll be throwing much more away than those few items listed.
|
|
|
12-14-2014, 11:40 PM
|
#9
|
Join Date: Jan 2007
Posts: 2
|
Interested in the wheels, Need a couple sets of 16x8's for a chumpcar build. Also need a 98+ passenger side Camaro fender if you have one.
__________________
2001 Trans Am WS6 M6
|
|
|
12-15-2014, 11:37 AM
|
#10
|
Stalker
Join Date: Aug 2004
Posts: 12,077
|
Quote:
Originally Posted by Mikerace15
Interested in the wheels, Need a couple sets of 16x8's for a chumpcar build. Also need a 98+ passenger side Camaro fender if you have one.
|
Ok, and yes I will have a fender for $75 off my '98 z28 within a week or two. I just have to start pulling the car apart towards the end of this week.
|
|
|
12-17-2014, 06:11 PM
|
#11
|
Stalker
Join Date: Aug 2004
Posts: 12,077
|
Free stuff going in the dumpster this weekend!!
|
|
|
12-18-2014, 02:07 PM
|
#12
|
Join Date: Mar 2008
Location: Somerset, NJ
Posts: 4,223
|
Did you already give away the cloth Camaro seats
__________________
Jon
1999 Trans am WS6
1996 Corvette LT4 6 speed
|
|
|
12-18-2014, 05:00 PM
|
#13
|
Stalker
Join Date: Aug 2004
Posts: 12,077
|
Nothing has been picked up yet. im going over there tomorrow afternoon to tale pics of good stuff and start tossing other things. the dumpster will be there first thing in the morning.
Basically, Whoever shows up first gets the stuff.
Ive gotten a few pm's but i can't promise stuff.
Ill throw the seats in last if that helps any.
I'll also be tossing assorted 4th gen splash guard pieces, some other worn seat parts, and whatever i have laying around that i dont see much of a demand for.
I will say, feel free to stop by when I'm there to check the dumpster yourself to see if there's anything you may need. I'll be there about 11am-5pm tomorrow, and noon-4pm on saturday.
Last edited by V; 12-18-2014 at 05:15 PM.
|
|
|
12-19-2014, 12:08 AM
|
#14
|
12 Second Club
Join Date: Aug 2004
Location: Oradell
Posts: 8,368
|
paul, ill swing by tomorrow for that V ashtray piece
__________________
86 Camaro
88 Camaro
95 Impala SS
97 Trans Am WS6
98 Blazer ZR2
00 Corvette
04 CTS-V
07 Sublime Charger Daytona
10 Tahoe SSV
12 Tahoe LT
17 Malibu LT
|
|
|
12-19-2014, 07:10 AM
|
#15
|
Stalker
Join Date: Aug 2004
Posts: 12,077
|
Quote:
Originally Posted by maroman88
paul, ill swing by tomorrow for that V ashtray piece
|
ok. that works
|
|
|
12-19-2014, 12:49 PM
|
#16
|
Join Date: Mar 2008
Location: Somerset, NJ
Posts: 4,223
|
paul hold the cloth seats for me until the latest possible time you can trash them. like i said if you have the right rear leather seats ill pick them up and grab the seats and maybe a few other parts if you have them laying around.
__________________
Jon
1999 Trans am WS6
1996 Corvette LT4 6 speed
|
|
|
12-19-2014, 03:48 PM
|
#17
|
Stalker
Join Date: Aug 2004
Posts: 12,077
|
Quote:
Originally Posted by madness410
paul hold the cloth seats for me until the latest possible time you can trash them. like i said if you have the right rear leather seats ill pick them up and grab the seats and maybe a few other parts if you have them laying around.
|
ok, seats are still available since no one has picked them up yet and they are first come first serve. I plan on calling to have the dumpster picked up on monday. Its about 1/2 full now but mostly with yard junk i wanted gone. I have tomorrow and sunday to fill it with whatever else i can find and dont want lol.
I found the leather rear seat today and ill have my good camera with my tomorrow for some good pics in the sunlight.
All the free hatches have been stripped of everything and smashed. Its amazing when a hammer bounces off the glass and out of the dumpster without leaving a mark, 3 times.... lol.
Its not fbody, but.... I came across a passenger door from an 1985 ttop mustang. very rare door apparently, mainly the glass. It does have rust and rot on the bottom edge and lower outer skin, but otherwise a great door to fix since it is so rare, Glass is in great shape. The door shells only go for 150-200 online and the glass for around 150.
I'm asking $200 obo for it as it sits complete just without interior door panel. so pass the word to your mustang friends.
Last edited by V; 12-21-2014 at 06:40 PM.
|
|
|
12-19-2014, 05:52 PM
|
#18
|
12 Second Club
Join Date: May 2005
Location: clifton nj
Posts: 236
|
hey did you ever find the red 91-92 trunk panels I still need them thanks omar
__________________
67 Camaro RS
70 Camaro RS
95 Camaro Z28
|
|
|
12-19-2014, 09:52 PM
|
#19
|
Stalker
Join Date: Aug 2004
Posts: 12,077
|
Quote:
Originally Posted by omarcamaro
hey did you ever find the red 91-92 trunk panels I still need them thanks omar
|
ill have pics of those tomorrow
|
|
|
12-20-2014, 04:11 PM
|
#20
|
Stalker
Join Date: Aug 2004
Posts: 12,077
|
Quote:
Originally Posted by madness410
paul hold the cloth seats for me until the latest possible time you can trash them. like i said if you have the right rear leather seats ill pick them up and grab the seats and maybe a few other parts if you have them laying around.
|
Apparently the upper got a small cut on it at some point in time, if youre not interested I understand. Id take like $20 for all 3 pieces. And the black marks is just butyl windshield sealant and I just haven't cleaned it all off, it comes off fine. Pics were taken inside with low wight and my cell phone camera.
Quote:
Originally Posted by omarcamaro
hey did you ever find the red 91-92 trunk panels I still need them thanks omar
|
I found the door panels (manual windows), rear seat back, and the truck well panel. Came from a 91 RS. I thought they were all together but apparently not, So im still looking. The parts are dusty and dirty from sitting for 14 or so years.
|
|
|
12-21-2014, 12:32 PM
|
#21
|
Stalker
Join Date: Aug 2004
Posts: 12,077
|
no more seats
|
|
|
12-21-2014, 04:06 PM
|
#22
|
Join Date: Mar 2008
Location: Somerset, NJ
Posts: 4,223
|
ok cool is the small cut on the top of the large peice? did you give away the cloth seats?
__________________
Jon
1999 Trans am WS6
1996 Corvette LT4 6 speed
|
|
|
12-21-2014, 04:20 PM
|
#23
|
Stalker
Join Date: Aug 2004
Posts: 12,077
|
Quote:
Originally Posted by madness410
ok cool is the small cut on the top of the large peice? did you give away the cloth seats?
|
yes, its at the top of the back upper section.
I stripped the seats for the good parts, rest went in the dumpster. I had several people wanting them but no one followed through to show up, dumpster is leaving in the am.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|