|
03-04-2018, 10:01 AM
|
#1
|
Hippy Mod, Bergermeister Meisterberger, Moderator
Join Date: Aug 2004
Location: Ewing
Posts: 6,213
|
Gotta love when somebody runs a stop sign!
Last Saturday, someone blew a stop sign on me over by DMV off route 1 in Lawrence. I had no way to avoid them due to all the other traffic around. I'm waiting to hear back from the insurance company if the truck is going to be repaired or totaled. Their car ran into my right front tire for the most part, but the suspension on the truck is all bent up (the lift kit brackets are bent back and the wheel is scraping the steering knuckle) and the cab lifted in the back and twisted towards the driver's side and the driver's door sticks now. It doesn't look that bad in the picture but I can't tell if the hood pushed back and bowed a little or if the fender bowed. At least nobody was hurt. So I might be looking for a new daily driver soon if they total it.
-
__________________
69 Z28 JL8 4 wheel disc brakes - being restored
09 Silverado Z71
|
|
|
03-04-2018, 12:56 PM
|
#2
|
13 Second Club / Moderator
Join Date: Jan 2005
Location: Franklin Lakes, NJ
Posts: 8,692
|
Glad to hear everyone is alright. That looks like a hard impact! Did the Passat owner fess up to running the stop sign?
__________________
Quote:
Originally Posted by LS1ow
Except Jersey mike, great kid, but the way he looks at me makes me feel like im in danger
|
|
|
|
03-04-2018, 02:15 PM
|
#3
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
Ouch! Glad to see your okay though. Hopefully they pay out nicely
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
03-04-2018, 02:41 PM
|
#4
|
American Road Warrior
Join Date: Jul 2005
Location: Wastelands of NJ
Posts: 6,116
|
That just sucks. That's a nice truck
__________________
unstable bob gable: LEGENDARY LEGEND,
ICONIC ICON, AND AMERICAN BAD AZZ!!!
1991 Dodge Spirit R/T: Gran'pa lookin' 150+ mph turbo rocket.
2013 Dodge Avenger RT: Wastelands cruiser.
2008 Crown Vic Police Interceptor: 'Nuff said!
THE ONLY THING THAT SUCKS WORSE THEN IMPORTS ARE RICED OUT IMPORTS!!!
|
|
|
03-04-2018, 02:43 PM
|
#5
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,361
|
Sorry to hear but glad no one was hurt.
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
03-04-2018, 05:02 PM
|
#6
|
Hippy Mod, Bergermeister Meisterberger, Moderator
Join Date: Aug 2004
Location: Ewing
Posts: 6,213
|
A witness hung around to talk to the police and the other driver got a ticket. Luckily, the impact was 35 mph or less and we hit corner to corner which was probably the best case scenario regarding possible injuries. The suspension lift drop brackets are close to 1/4" steel and they bent back. I wonder if that caused the frame crossmember area to bend or stretch the bolt holes.
__________________
69 Z28 JL8 4 wheel disc brakes - being restored
09 Silverado Z71
Last edited by JL8Jeff; 03-04-2018 at 05:03 PM.
|
|
|
03-04-2018, 05:33 PM
|
#7
|
Power Member
Join Date: Oct 2007
Location: Milford NJ
Posts: 1,526
|
I'm my experience, most aftermarket parts will bend before the factory pieces.
Glad to hear your ok Jeff
Last edited by //<86TA>\\; 03-04-2018 at 05:33 PM.
|
|
|
03-04-2018, 07:01 PM
|
#8
|
Join Date: Sep 2008
Location: Hackettstown, NJ
Posts: 1,649
|
Sorry to hear about the truck but glad you're OK, Jeff.
__________________
1998 Z-28 - SLP lid - Ported TB - LS6 Intake - Dynatech SS headers/Catted Y - Magnaflow Exh - 3.42 - Yank SS3600 - UMI weld-in subframe connectors, Adj LCA, Adj PHB, Q1A TA - Bolt-in Relocation Brackets - Strano springs - Koni shocks - 17" C6Z06 wheels - 326HP/335ft-lbs - 12.35 @ 110.41
Quote:
Originally Posted by Blackbirdws6
I can appreciate a dream but this person needed some real friends.
|
|
|
|
03-04-2018, 08:03 PM
|
#9
|
Power Member/NJFBOA Bookie/Moderator
Join Date: Jun 2009
Location: North Jersey = Best Jersey.
Posts: 4,435
|
Glad you're okay
__________________
1995 Firebird... Stock-ish.
Quote:
Originally Posted by LS1ow
Good. He microwaved my phone 6 years ago, i hope his intake erupts.
|
|
|
|
03-05-2018, 08:26 AM
|
#10
|
10 Second Club / Meet Coordinator
Join Date: Dec 2004
Location: Roxbury, NJ
Posts: 2,118
|
ah bummer about the crash. best of luck with the repair if able to be repaired
__________________
1987 IROC-Z - modified
|
|
|
03-06-2018, 07:53 AM
|
#11
|
Join Date: Feb 2017
Posts: 12
|
Good thing, no one got hurt.
|
|
|
03-06-2018, 11:59 AM
|
#12
|
Hippy Mod, Bergermeister Meisterberger, Moderator
Join Date: Aug 2004
Location: Ewing
Posts: 6,213
|
And it's a total loss. The frame is bent pretty good they said so the repairs would be too high. Time to figure out what to get for a new daily driver. I don't know if I could live without a pickup at this point.
__________________
69 Z28 JL8 4 wheel disc brakes - being restored
09 Silverado Z71
|
|
|
03-06-2018, 12:45 PM
|
#13
|
The Mayor / 2009 Member of the Year / Moderator
Join Date: Jan 2005
Location: Northwest
Posts: 8,867
|
Quote:
Originally Posted by JL8Jeff
And it's a total loss. The frame is bent pretty good they said so the repairs would be too high. Time to figure out what to get for a new daily driver. I don't know if I could live without a pickup at this point.
|
5th gen can't tow the boat?
__________________
1995 Z28 Convertible A4 13.78 @ 100 (CAI, high flow cat, catback, 160 thermo, hypertech, Strano springs, Koni yellows, sway bars, 3 pt. UMI SFC)
2018 Sea Doo GTX - 3 cylinders and das boooooost
Quote:
Originally Posted by BonzoHansen
Is English your 2nd language? Did you graduate high school? Your posts make my head hurt.
|
Team FARM
Last edited by Anti_Rice_Guy; 03-06-2018 at 12:45 PM.
|
|
|
03-06-2018, 01:12 PM
|
#14
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,153
|
Quote:
Originally Posted by JL8Jeff
And it's a total loss. The frame is bent pretty good they said so the repairs would be too high. Time to figure out what to get for a new daily driver. I don't know if I could live without a pickup at this point.
|
whats the buy out?
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
03-06-2018, 05:09 PM
|
#15
|
Hippy Mod, Bergermeister Meisterberger, Moderator
Join Date: Aug 2004
Location: Ewing
Posts: 6,213
|
Quote:
Originally Posted by Anti_Rice_Guy
5th gen can't tow the boat?
|
I was thinking about that. I still have a 4th gen trailer hitch though. I stopped by the shop to get stuff out of the truck and the plates and took a better look at the bent up suspension. It's even worse than I thought. Part of the frame even cracked. They said it wasn't even close to lining up. The passenger front wheel went backwards with the cab and the driver's side came forward. It didn't feel like that bad of a hit probably because the tire and suspension absorbed most of it.
__________________
69 Z28 JL8 4 wheel disc brakes - being restored
09 Silverado Z71
|
|
|
03-23-2018, 08:56 PM
|
#16
|
Hippy Mod, Bergermeister Meisterberger, Moderator
Join Date: Aug 2004
Location: Ewing
Posts: 6,213
|
So I finally got a replacement truck. It's a 2013 Tacoma regular cab 4x4 with around 3" of suspension lift with 285/75/16 (33") tires. It's amazing how stripped down these regular cab Tacomas are. Manual windows, manual door locks, manual mirrors, it actually has bucket seats and console with the automatic and that killer 2.7l 4 cyl engine! I feel like I'm sitting at least a foot lower than my Silverado was but I don't really need a full size truck so this will work well. It's actually got some nice add ons including aftermarket springs/shocks/struts, aftermarket upper control arms, Pro Comp wheels, new 285/75/16 tires, new cat/resonator pipe, new battery, welded on body sliders, trailer hitch/wiring, differential drop, add a leafs. I looked for 3 weeks for a Tacoma regular cab and since they don't make them anymore, they tend to sell fast. I need to try and get better pictures on a cloudy day, it washes out really bad on sunny days, especially with snow in the background.
-
__________________
69 Z28 JL8 4 wheel disc brakes - being restored
09 Silverado Z71
Last edited by JL8Jeff; 03-24-2018 at 06:27 PM.
|
|
|
03-24-2018, 02:19 AM
|
#17
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,361
|
Congrats on the purchase. Mods look tasteful. Time to update the signature.
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
03-24-2018, 09:12 AM
|
#18
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,342
|
Looks good sir
|
|
|
03-27-2018, 05:24 PM
|
#19
|
^^^Lover of bad cars^^^ Meet Coordinator
Join Date: Aug 2007
Location: Whitehouse Station
Posts: 2,261
|
Those trucks are great. Nice buy!
__________________
1986 Honda VFR750 - 89.3HP to the wheel
2000 Trans Am M6 - Mods: Yes.
2018 Durango R/T - AFE Intake, JLT Catch Can, Stainless Works Catback, Vinyl Dodge Racing Stripes
2003 Toyota Matrix XRS M6 - Lol
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|