|
10-25-2007, 08:12 PM
|
#1
|
10 Second Club; Has fan club
Join Date: Dec 2005
Location: Delmont nj
Posts: 4,369
|
my electric autometer gauge seems to stay at 50 psi.. why?
just installed it today. i put it in the spot that sits on top of where the oil filter is. i turn the key on and it goes to 50psi.... i start the car and run it, it stays at 50psi.. run it thru high rpm... stays at 50psi! whats up with that? thanks for any help that u may provide!
__________________
01' Z06 62k miles. Vararam, Longtubes, off road xpipe, tuned by me. Times TBA
2001 Corvette, Bolt ons , tuned 10.75@124.56 mph 1.38 60' Sold
1997 Saturn Sc1 5spd DOHC swapped
Bolt ons, decked head, stock intake cam on exhaust side, lotsa weight redux
13.22@102.32 mph 1.93 60'
12's on moda? One day
|
|
|
10-25-2007, 10:54 PM
|
#2
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
First things first- check all of your connections. You may have reversed some of them.
|
|
|
10-25-2007, 11:21 PM
|
#3
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
Quote:
Originally Posted by WildBillyT
First things first- check all of your connections. You may have reversed some of them.
|
+1 you got something backwards.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
10-26-2007, 08:39 AM
|
#4
|
11 Second Club
Join Date: Jan 2005
Location: Fishkill, NY
Posts: 1,278
|
That is right around what an LS1 will be at normally 40-60, but it shouldn't move at all until you start the car. Check the ground wire
__________________
-Nick
9/11/01- Never Forget
2002 Pontiac Trans-Am WS6 # 206
Chasing 10's
469RWH/437RWTQ
11.05 @ 123
|
|
|
10-26-2007, 09:56 AM
|
#5
|
10 Second Club; Has fan club
Join Date: Dec 2005
Location: Delmont nj
Posts: 4,369
|
thanks fellas, i shall do that and post what i did wrong lol
__________________
01' Z06 62k miles. Vararam, Longtubes, off road xpipe, tuned by me. Times TBA
2001 Corvette, Bolt ons , tuned 10.75@124.56 mph 1.38 60' Sold
1997 Saturn Sc1 5spd DOHC swapped
Bolt ons, decked head, stock intake cam on exhaust side, lotsa weight redux
13.22@102.32 mph 1.93 60'
12's on moda? One day
|
|
|
10-26-2007, 01:25 PM
|
#6
|
10 Second Club; Has fan club
Join Date: Dec 2005
Location: Delmont nj
Posts: 4,369
|
all connections are correct. im guessing the sender could be bad, so im going to get a new one sometime
__________________
01' Z06 62k miles. Vararam, Longtubes, off road xpipe, tuned by me. Times TBA
2001 Corvette, Bolt ons , tuned 10.75@124.56 mph 1.38 60' Sold
1997 Saturn Sc1 5spd DOHC swapped
Bolt ons, decked head, stock intake cam on exhaust side, lotsa weight redux
13.22@102.32 mph 1.93 60'
12's on moda? One day
|
|
|
10-26-2007, 01:54 PM
|
#7
|
Power Member
Join Date: Jul 2006
Location: Old Bridge, NJ
Posts: 2,415
|
did you use teflon tape on the sending unit?
|
|
|
10-27-2007, 12:54 PM
|
#8
|
10 Second Club; Has fan club
Join Date: Dec 2005
Location: Delmont nj
Posts: 4,369
|
Quote:
Originally Posted by Fast92RS
did you use teflon tape on the sending unit?
|
indeed i did. it said to use A sealer so i figured teflon tape would be fine. its not leaking or anything, but do u think its messing up the ground? because on the directions it said the sender should ground itself. maybe i could touch a wire to it and to a good ground and have a friend look a the gauge to see if it changes anything before i go taking it out
__________________
01' Z06 62k miles. Vararam, Longtubes, off road xpipe, tuned by me. Times TBA
2001 Corvette, Bolt ons , tuned 10.75@124.56 mph 1.38 60' Sold
1997 Saturn Sc1 5spd DOHC swapped
Bolt ons, decked head, stock intake cam on exhaust side, lotsa weight redux
13.22@102.32 mph 1.93 60'
12's on moda? One day
Last edited by 98tadriver; 10-27-2007 at 12:55 PM.
|
|
|
10-27-2007, 01:15 PM
|
#9
|
Power Member
Join Date: Jul 2006
Location: Old Bridge, NJ
Posts: 2,415
|
that happen to me once with using teflon tape. Try using a liguid or paste pipe thread sealant instead of teflon tape.
Last edited by Fast92RS; 10-27-2007 at 01:15 PM.
|
|
|
10-28-2007, 06:45 PM
|
#10
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Quote:
Originally Posted by 98tadriver
indeed i did. it said to use A sealer so i figured teflon tape would be fine. its not leaking or anything, but do u think its messing up the ground? because on the directions it said the sender should ground itself. maybe i could touch a wire to it and to a good ground and have a friend look a the gauge to see if it changes anything before i go taking it out
|
What you can do is bench-wire it. Don't install the gauge in a pod or anything, but keep it loose so you can check the connections. If you are sure they are right, and you are SURE you have a good ground, then replace the sender.
|
|
|
10-29-2007, 04:55 PM
|
#11
|
Join Date: Oct 2004
Location: East Brunswick, NJ
Posts: 155
|
Does the pressure connection on the LS1 fuel system require that you remove the core from the valve?
__________________
Fred
1994 Formula - 381ci / 300-shot N2O / TH400 / Gear Vendor OD / Strange 12-bolt 4.11 - 11.5@117 on straight motor
|
|
|
10-29-2007, 10:10 PM
|
#12
|
10 Second Club; Has fan club
Join Date: Dec 2005
Location: Delmont nj
Posts: 4,369
|
Quote:
Originally Posted by Injuneer
Does the pressure connection on the LS1 fuel system require that you remove the core from the valve?
|
lol this is an oil pressure gauge, not fuel.
__________________
01' Z06 62k miles. Vararam, Longtubes, off road xpipe, tuned by me. Times TBA
2001 Corvette, Bolt ons , tuned 10.75@124.56 mph 1.38 60' Sold
1997 Saturn Sc1 5spd DOHC swapped
Bolt ons, decked head, stock intake cam on exhaust side, lotsa weight redux
13.22@102.32 mph 1.93 60'
12's on moda? One day
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|