| 
| 
	
		|  |  
	
	
		
	
	
	
		|  08-22-2006, 08:14 PM | #1 |  
	| 
				 
                                        
				Join Date: Mar 2006 Location: sayreville nj 
					Posts: 2,175
				     
                                    
                                 | 
				
				clean up time
			 
 
			
			#1 T04E stage 5 turbo .63/.50AR - 300$#2 blitz style bov - 75$
 #3 turbo xs bov - 75$
 #4 misc silicone couplers
 2.0 to 2.5 inch 15$
 three 2.5 inch couplers 25$ for all
 two 2.5 to 3.0 inch couplers 25$ for both
 #5 misc nitrous an feed lines $30's each
 #6 2,400 stall B&M converter 30 pline 700r4 250$'s
 #7 1 set third gen mid length headers $100
 #8 edlebrock 650 carb 100$'s
 #9 edlebrock air gap 100$'s
 #10 walboro 255lph pump new in box 100$'s
 #11 new weld draglites with hoosier 26x9x15 non dot slick do5 compound 2 passes no burnouts 450$'s
 #12 misc gauges
 autometer water temp phantom 15$'s needs new sender
 faze afr 50$'s
 faze boost/vac 50$'s
 more will be added
 
				__________________#1 1989 RS - 3.0L V6 11.0-1 CR, LIGHTENED CRANK,J.E FORGED PISTONS, CUSTOM 280/284 .575/.575 116LSA ROLLER CAM, PORTED HEADS, PORTED INTAKE,CUSTOM TURBO KIT W/ BW S475,AW INTERCOOLER,METHANOL INJECTION,  TCI STREETFIGHTER 700R4 W/ TCI 4,500 STALL,TWIN WALBORO 255'S & 83# INJECTORS
 268 rwhp & 367.6 ftlbs @ 10 psi 3.1l
 12.30's @ 112 3.1L @ 9 psi
 ??.?? @ ???? 3.0L @ 18 PSI
 |  
	|   |  |  
	
		
	
	
	
		|  08-23-2006, 01:48 PM | #2 |  
	| 
				 
                                        
				Join Date: Mar 2006 Location: sayreville nj 
					Posts: 2,175
				     
                                    
                                 | 
			
			#1 regal turbo (draw threw carb style) 150# .83/.60AR#2 misc injectors
 3.4 injectors 25$'s
 350 tpi injectors 25#'s
 30# injectors 100$'s
 #3 steel 1.5 rockers new 75$
 #4 2 used sbc water pumps 15$'s
 #5 assorted automatic flywheels 10$ each
 #6 vortec 6-1 fmu 80$'s
 #7 2 cherry bomb turbo mufflers offest in/out 2.5 inch 20$'s
 #8 brand new ported gen 2 60* heads complete 600$'s
 #9 3.4 block cleaned preped and bored .030 over 300$'s
 #10 crower crank for 60* motor 1,200 $'s firm
 #11 forged 327 small journal  H-beam rods machined to fit 60* motors 200$'s
 #12 j.e forged pistions for 3.4 for use with aluminum heads 8.5-1 cr with 25cc heads 500$'s
 more to add later
 slicks = pending sale
 fuel pump = pending sale
 all turbo stuff except the regal turbo  = pending sale
 
				__________________#1 1989 RS - 3.0L V6 11.0-1 CR, LIGHTENED CRANK,J.E FORGED PISTONS, CUSTOM 280/284 .575/.575 116LSA ROLLER CAM, PORTED HEADS, PORTED INTAKE,CUSTOM TURBO KIT W/ BW S475,AW INTERCOOLER,METHANOL INJECTION,  TCI STREETFIGHTER 700R4 W/ TCI 4,500 STALL,TWIN WALBORO 255'S & 83# INJECTORS
 268 rwhp & 367.6 ftlbs @ 10 psi 3.1l
 12.30's @ 112 3.1L @ 9 psi
 ??.?? @ ???? 3.0L @ 18 PSI
 
				 Last edited by project89; 08-23-2006 at 01:58 PM.
 |  
	|   |  |  
	
		
	
	
	
		|  08-23-2006, 02:03 PM | #3 |  
	| 
				 
                                        
				Join Date: Mar 2006 Location: sayreville nj 
					Posts: 2,175
				     
                                    
                                 | 
			
			2 seperate alumapro bp-12 enclosures #1 has original alumapro driver = 500
 #2 has a diesil auido driver = 400 both for 750$'s
 amps
 #1 rockford 301m 400 watts rms/950 peak 200$'s
 have to look up specs on the alipne amp but pretty sure its 300/700
 
 nitrous stuff
 #1 5 pound no2 bottle Make offer
 #2 10 pound nx bottle make offer
 
 misc stuff
 #1 tpi/v6 camaro dual snorkle air box make offer
 #2 ram air conversion kit for thirdgen camaros make offer
 
 cars
 #1 89 rs camaro sold as roller or with new 3.1 engin/built trans/no turbo  needs paint/minor body work and a head liner  1Le swaybars/springs wonderbar/and custom stb brace  make offer
 
				__________________#1 1989 RS - 3.0L V6 11.0-1 CR, LIGHTENED CRANK,J.E FORGED PISTONS, CUSTOM 280/284 .575/.575 116LSA ROLLER CAM, PORTED HEADS, PORTED INTAKE,CUSTOM TURBO KIT W/ BW S475,AW INTERCOOLER,METHANOL INJECTION,  TCI STREETFIGHTER 700R4 W/ TCI 4,500 STALL,TWIN WALBORO 255'S & 83# INJECTORS
 268 rwhp & 367.6 ftlbs @ 10 psi 3.1l
 12.30's @ 112 3.1L @ 9 psi
 ??.?? @ ???? 3.0L @ 18 PSI
 
				 Last edited by project89; 08-23-2006 at 02:08 PM.
 |  
	|   |  |  
	
		
	
	
	
		|  08-23-2006, 02:17 PM | #4 |  
	| Co-Founder / Site Admin 
				 
                                        
				Join Date: Jul 2004 Location: Ewing, NJ 
					Posts: 22,476
				 | 
			
			
	Quote: 
	
		| 
					Originally Posted by lethalrides2k3
					
				 #1 89 rs camaro sold as roller or with new 3.1 engin/built trans/no turbo  needs paint/minor body work and a head liner  1Le swaybars/springs wonderbar/and custom stb brace  make offer |  Care to sell the hood from it?
 
 - Justin
		 
				__________________1999 Camry  - Beigemobile DD
2002 Suburban  - Wife's DD
2004 Grand Cherokee  - Not running / Project / Selling?
   |  
	|   |  |  
	
		
	
	
	
		|  08-23-2006, 02:19 PM | #5 |  
	| 
				 
                                        
				Join Date: Mar 2006 Location: sayreville nj 
					Posts: 2,175
				     
                                    
                                 | 
			
			no i dont have another hood to put on the car,unless u can find me one the right color lol
		 
				__________________#1 1989 RS - 3.0L V6 11.0-1 CR, LIGHTENED CRANK,J.E FORGED PISTONS, CUSTOM 280/284 .575/.575 116LSA ROLLER CAM, PORTED HEADS, PORTED INTAKE,CUSTOM TURBO KIT W/ BW S475,AW INTERCOOLER,METHANOL INJECTION,  TCI STREETFIGHTER 700R4 W/ TCI 4,500 STALL,TWIN WALBORO 255'S & 83# INJECTORS
 268 rwhp & 367.6 ftlbs @ 10 psi 3.1l
 12.30's @ 112 3.1L @ 9 psi
 ??.?? @ ???? 3.0L @ 18 PSI
 |  
	|   |  |  
	
		
	
	
	
		|  08-23-2006, 02:21 PM | #6 |  
	| Co-Founder / Site Admin 
				 
                                        
				Join Date: Jul 2004 Location: Ewing, NJ 
					Posts: 22,476
				 | 
			
			
	Quote: 
	
		| 
					Originally Posted by lethalrides2k3
					
				 no i dont have another hood to put on the car,unless u can find me one the right color lol |  PM Sent....
 
 - Justin
		 
				__________________1999 Camry  - Beigemobile DD
2002 Suburban  - Wife's DD
2004 Grand Cherokee  - Not running / Project / Selling?
   |  
	|   |  |  
	
		
	
	
	
		|  08-23-2006, 11:19 PM | #7 |  
	| 
				 
                                        
				Join Date: Mar 2006 Location: sayreville nj 
					Posts: 2,175
				     
                                    
                                 | 
			
			car/w turbo setup is pending a trade in on another car.
		 
				__________________#1 1989 RS - 3.0L V6 11.0-1 CR, LIGHTENED CRANK,J.E FORGED PISTONS, CUSTOM 280/284 .575/.575 116LSA ROLLER CAM, PORTED HEADS, PORTED INTAKE,CUSTOM TURBO KIT W/ BW S475,AW INTERCOOLER,METHANOL INJECTION,  TCI STREETFIGHTER 700R4 W/ TCI 4,500 STALL,TWIN WALBORO 255'S & 83# INJECTORS
 268 rwhp & 367.6 ftlbs @ 10 psi 3.1l
 12.30's @ 112 3.1L @ 9 psi
 ??.?? @ ???? 3.0L @ 18 PSI
 |  
	|   |  |  
	
		
	
	
	
		|  08-24-2006, 09:01 AM | #8 |  
	|   
				 
                                        
				Join Date: Aug 2004 Location: Hillsborough, NJ 
					Posts: 3,200
				     
                                    
                                 | 
			
			The dual snorkel airbox, is this an original or home made?  Is it the large round box that fits carb or TBI cars?
		 
				__________________ 
				I USED TO HAVE an 85 Camaro 305 4bbl, 90 Firebird V6, 97 Firebird V6 (10 speakers!). Despite the two family vehicles, 3 kids, wife and mortgage, I can finally realize the dream - 88 TA almost all stock... for now.
 
http://www.cardomain.com/id/untameddave 
Wanted this -    , but ended up with this -    for free.  Can't argue with free.
			 |  
	|   |  |  
	
		
	
	
	
		|  08-24-2006, 03:27 PM | #9 |  
	| 
				 
                                        
				Join Date: Mar 2006 Location: sayreville nj 
					Posts: 2,175
				     
                                    
                                 | 
			
			ist original,but its a tpi box
		 
				__________________#1 1989 RS - 3.0L V6 11.0-1 CR, LIGHTENED CRANK,J.E FORGED PISTONS, CUSTOM 280/284 .575/.575 116LSA ROLLER CAM, PORTED HEADS, PORTED INTAKE,CUSTOM TURBO KIT W/ BW S475,AW INTERCOOLER,METHANOL INJECTION,  TCI STREETFIGHTER 700R4 W/ TCI 4,500 STALL,TWIN WALBORO 255'S & 83# INJECTORS
 268 rwhp & 367.6 ftlbs @ 10 psi 3.1l
 12.30's @ 112 3.1L @ 9 psi
 ??.?? @ ???? 3.0L @ 18 PSI
 |  
	|   |  |  
	
		
	
	
	
		|  08-24-2006, 04:54 PM | #10 |  
	| 
				 
                                        
				Join Date: Nov 2005 Location: Edison 
					Posts: 7,856
				     
                                    
                                 | 
			
			how much for the regal turbo?
 turbo lg4!!!!!!! lol
 |  
	|   |  |  
	
		
	
	
	
		|  08-24-2006, 04:57 PM | #11 |  
	| 
				 
                                        
				Join Date: Mar 2006 Location: sayreville nj 
					Posts: 2,175
				     
                                    
                                 | 
			
			i thought u were buying that engine from me its 150$
 
				__________________#1 1989 RS - 3.0L V6 11.0-1 CR, LIGHTENED CRANK,J.E FORGED PISTONS, CUSTOM 280/284 .575/.575 116LSA ROLLER CAM, PORTED HEADS, PORTED INTAKE,CUSTOM TURBO KIT W/ BW S475,AW INTERCOOLER,METHANOL INJECTION,  TCI STREETFIGHTER 700R4 W/ TCI 4,500 STALL,TWIN WALBORO 255'S & 83# INJECTORS
 268 rwhp & 367.6 ftlbs @ 10 psi 3.1l
 12.30's @ 112 3.1L @ 9 psi
 ??.?? @ ???? 3.0L @ 18 PSI
 |  
	|   |  |  
	
		
	
	
	
		|  08-24-2006, 07:43 PM | #12 |  
	| 
				 
                                        
				Join Date: Nov 2005 Location: Edison 
					Posts: 7,856
				     
                                    
                                 | 
			
			i am getting the engine from you..
 I just wanted to see how much you wanted for the turbo, because it said blow through carb style or what ever
 |  
	|   |  |  
	
		
	
	
	
		|  08-24-2006, 08:09 PM | #13 |  
	| 
				 
                                        
				Join Date: Mar 2006 Location: sayreville nj 
					Posts: 2,175
				     
                                    
                                 | 
			
			draw threw
		 
				__________________#1 1989 RS - 3.0L V6 11.0-1 CR, LIGHTENED CRANK,J.E FORGED PISTONS, CUSTOM 280/284 .575/.575 116LSA ROLLER CAM, PORTED HEADS, PORTED INTAKE,CUSTOM TURBO KIT W/ BW S475,AW INTERCOOLER,METHANOL INJECTION,  TCI STREETFIGHTER 700R4 W/ TCI 4,500 STALL,TWIN WALBORO 255'S & 83# INJECTORS
 268 rwhp & 367.6 ftlbs @ 10 psi 3.1l
 12.30's @ 112 3.1L @ 9 psi
 ??.?? @ ???? 3.0L @ 18 PSI
 |  
	|   |  |  
	
		
	
	
	
		|  08-25-2006, 02:53 PM | #14 |  
	| 
				 
                                        
				Join Date: Dec 2005 
					Posts: 87
				     
                                    
                                 | 
			
			My friend is interested in the 650 carb, shoot him am email when you get a chance. joe_bianco@cable.comcast.com |  
	|   |  |  
	
		
	
	
	
		|  08-26-2006, 12:44 PM | #15 |  
	| 
				 
                                        
				Join Date: Mar 2006 Location: sayreville nj 
					Posts: 2,175
				     
                                    
                                 | 
			
			
	Quote: 
	
		| 
					Originally Posted by 97ws6
					
				 |  its gone,i may be able to get another though  
updated list  
2 seperate alumapro bp-12 enclosures 
#1 has original alumapro driver = 500 
#2 has a diesil auido driver = 400 both for 750$'s 
amps 
#1 rockford 301m 400 watts rms/950 peak 200$'s 
have to look up specs on the alipne amp but pretty sure its 300/700
 
#1 regal turbo (draw threw carb style) 150# .83/.60AR 
#3 steel 1.5 rockers new 75$ 
#4 2 used sbc water pumps 15$'s 
#5 assorted automatic flywheels 10$ each
 this stuff i really need gone #8 brand new ported gen 2 60* heads complete 600$'s
 #9 3.4 block cleaned preped and bored .030 over 300$'s
 #10 crower forged crank for 60* motor (3.1/3.4 or used to stroke 2.8 to 3.1/3.4L 1,200 $'s firm
 #11 forged 327 small journal H-beam rods machined to fit 60* motors 200$'s
 #12 .030 j.e forged pistions for 3.4 for use with aluminum heads 8.5-1 cr with 25cc heads 500$
 or take complet longblock for 2,300$'s
 
				__________________#1 1989 RS - 3.0L V6 11.0-1 CR, LIGHTENED CRANK,J.E FORGED PISTONS, CUSTOM 280/284 .575/.575 116LSA ROLLER CAM, PORTED HEADS, PORTED INTAKE,CUSTOM TURBO KIT W/ BW S475,AW INTERCOOLER,METHANOL INJECTION,  TCI STREETFIGHTER 700R4 W/ TCI 4,500 STALL,TWIN WALBORO 255'S & 83# INJECTORS
 268 rwhp & 367.6 ftlbs @ 10 psi 3.1l
 12.30's @ 112 3.1L @ 9 psi
 ??.?? @ ???? 3.0L @ 18 PSI
 
				 Last edited by project89; 08-26-2006 at 12:47 PM.
 |  
	|   |  |  
	
		
	
	
	
		|  08-27-2006, 12:06 PM | #16 |  
	| 
				 
                                        
				Join Date: Mar 2006 Location: sayreville nj 
					Posts: 2,175
				     
                                    
                                 | 
			
			delete this thread plz
		 
				__________________#1 1989 RS - 3.0L V6 11.0-1 CR, LIGHTENED CRANK,J.E FORGED PISTONS, CUSTOM 280/284 .575/.575 116LSA ROLLER CAM, PORTED HEADS, PORTED INTAKE,CUSTOM TURBO KIT W/ BW S475,AW INTERCOOLER,METHANOL INJECTION,  TCI STREETFIGHTER 700R4 W/ TCI 4,500 STALL,TWIN WALBORO 255'S & 83# INJECTORS
 268 rwhp & 367.6 ftlbs @ 10 psi 3.1l
 12.30's @ 112 3.1L @ 9 psi
 ??.?? @ ???? 3.0L @ 18 PSI
 |  
	|   |  |  
	
		
 
  
	
	
	
	
	| 
	|  Posting Rules |  
	| 
		
		You may not post new threads You may not post replies You may not post attachments You may not edit your posts 
 HTML code is Off 
 |  |  |  | 
 |  |