About time! - NJFBOA - Home of New Jersey's Camaros and Firebirds

35thls1ss19 · 09-30-2006, 02:01 PM

Well yesterday i went to get my car tuned on spray. My last tune was a mess and the guys at eastside re did it for free. I ended up makin 427 rwhp and 377 rwtq NA thast threw a 9inch and a N2o tune!

On a 75 shot i made 498rwhp 488rwtq

SO i am goin to bump that shot to 125 and well see what happens

Last night at island i finally hit 11's i went 12.2 @ 117 all night with a **** 1.9 60'. I usally pull 1.6-1.7. My tires are on there way out

SO i had to hit 11's so i sprayed it but my window swithc is brokin and will only tunr on at 4500. So i went 11.8 and 121. This cam loves spray and the car felt really good! So i am hopein to get a new window switch this week so i can spray @ 3000rpm and bump the shot up. Hopefully next week well see low 11's. Its a full weight car to by the way

r0nin89 · 09-30-2006, 02:02 PM

Nice!

78camaro · 09-30-2006, 02:04 PM

awesome numbers, stock internals? if not why not bump the spray to 150

35thls1ss19 · 09-30-2006, 02:05 PM

yes stock internals for now. Over the winter that might change

But then i will bump it to 300

Or might go forced induction

Tru2Chevy · 10-02-2006, 02:37 PM

What was your full slip?

11.8 seems kinda slow for heads/cam + some spray....not knocking you or anything, I know it's a new setup.

- Justin

35thls1ss19 · 10-02-2006, 02:43 PM

Quote:

Originally Posted by Tru2Chevy

What was your full slip?

11.8 seems kinda slow for heads/cam + some spray....not knocking you or anything, I know it's a new setup.

- Justin

o its very slow lol i want to be there if not better NA

That was a 2.0 60' Last year before all the work i was pulling 1.6 1.7 i dotn no maybe my tries are gettin beat? I was happy with my trap 117 na and 121 with the 75 shot. But liek i said my window switch would not turn on till 4500-4800 for soem reason. SO hopefully this week i will get a new one and it will go on a 3000 when it should be! Then i can get a littel mroe seat time and she what she can do

enRo · 10-02-2006, 02:47 PM

Tru2Chevy · 10-02-2006, 02:47 PM

Cool beans.

Only a 2.0 short time with a 9", 4.10's, and slicks? Did it feel like it was spinning, or just not leaving hard enough?

- Justin

35thls1ss19 · 10-02-2006, 02:47 PM

o yea my slip haha

60' 1.930
330 5.171
1/8 7.800
Mph 94.52
1000 10.036
1/4 11.802
Mph 121.97

like you said its a new set up and i sure can use some weight reduction

Maybe friday i will pull out the interior

35thls1ss19 · 10-02-2006, 02:50 PM

Quote:

Originally Posted by Tru2Chevy

Cool beans.

Only a 2.0 short time with a 9", 4.10's, and slicks? Did it feel like it was spinning, or just not leaving hard enough?

- Justin

na no slicks jsut drag radials

Tru2Chevy · 10-02-2006, 02:50 PM

Quote:

Originally Posted by 35thls1ss19

na no slicks jsut drag radials

Still.....spinning or bogging?

- Justin

35thls1ss19 · 10-02-2006, 02:53 PM

Quote:

Originally Posted by Tru2Chevy

Still.....spinning or bogging?

- Justin

spinning i was launching like 4500 then i droped down to 4000 and it was boggin a lil

Tru2Chevy · 10-02-2006, 03:01 PM

Ahh....well, play with the launch RPM and the air pressure, you'll get it sorted out.

- Justin

foff667 · 10-02-2006, 04:13 PM

glad to see they fixed that stuff for free for you...seems like it worked out well...im suprised you couldnt hit 11's NA with your setup though, even at full weight. Also if you planned on stepping to the 125 shot you really shouldve dynoed with it to see if your a/f is at least safe or did you?

35thls1ss19 · 10-02-2006, 06:55 PM

Quote:

Originally Posted by foff667

glad to see they fixed that stuff for free for you...seems like it worked out well...im suprised you couldnt hit 11's NA with your setup though, even at full weight. Also if you planned on stepping to the 125 shot you really shouldve dynoed with it to see if your a/f is at least safe or did you?

Yea that code it was throwin was addin timin so the first kid thats tuned it didnt add anymore and that was thorwin off my tune. SO the owner re tuned it. I think i am at the right numbers? seems good for being threw a 9inch? idk. And i dotn get it either my trap speed is good for 11's 117? i would think. Maybe i just need the drvier mod?

haha And the guys at eastside said if i stay with the jets suggesed and stay under a 200 shot i should be ok without the tune? i know nothin abotu tuneing but i do no i dotn want to go lean, what u think?

foff667 · 10-02-2006, 07:13 PM

you really should verify your a/f when going to different jets...also consider a happy knob or something similar to retard your timing. Nitrous can be rewarding but you really need to treat it & its part correctly and don't skimp cuz those low dollar parts are always the ones that will cost you a motor.

35thls1ss19 · 10-02-2006, 07:24 PM

Quote:

Originally Posted by foff667

you really should verify your a/f when going to different jets...also consider a happy knob or something similar to retard your timing. Nitrous can be rewarding but you really need to treat it & its part correctly and don't skimp cuz those low dollar parts are always the ones that will cost you a motor.

yea i hear ya i mean i haev everything i can possibly get except for a timin tuner and i didnt get that bc i just wanted to tune the car for n20. everything else i have from fpss to wot switch, window switch, bigger fuel pump it should be pretty safe. now i am just not sure abotu bumpin the jets bigger

foff667 · 10-02-2006, 07:49 PM

time to invest in a wideband...AEM & innovate make good inexpensive units with gauges.

35thls1ss19 · 10-02-2006, 08:09 PM

Quote:

Originally Posted by foff667

time to invest in a wideband...AEM & innovate make good inexpensive units with gauges.

very tru haha only more money right?

lastcall190 · 10-03-2006, 12:41 AM

Hey there's the power!

jk buddy nice job, can't wait to cam my car in the spring... how hard were your poly mounts to put in (you did them yourself, right?), I'm trying them this thanksgiving break.

-J

79CamaroDiva · 10-03-2006, 08:39 AM

Quote:

Originally Posted by 35thls1ss19

Maybe i just need the drvier mod?

well... you know how to fix that real quick

personally, i would invest in something other than drag radials, if you have a 9 inch, pick up MT ET streets (NOT the radial kind), Hoosier Quick Time Pros or full out slicks.. any amount of time picked up in the 60' typically doubles in the quarter, if you can bring that 60' down a tenth or two, that should pick up .2-.4 up top.

35thls1ss19 · 10-03-2006, 08:47 AM

Quote:

Originally Posted by 79CamaroDiva

well... you know how to fix that real quick

personally, i would invest in something other than drag radials, if you have a 9 inch, pick up MT ET streets (NOT the radial kind), Hoosier Quick Time Pros or full out slicks.. any amount of time picked up in the 60' typically doubles in the quarter, if you can bring that 60' down a tenth or two, that should pick up .2-.4 up top.

yea i want to to slicks i was lookign at the swap meet for a used set but i am nto sure what size to get. I am at the top of 4th and the end of the 1/4 so do i need a smaller tire or a bigger one? i dotn want to chage my gears and i no on a 125 shto or even a 100 shot i will not make the 1/4 without shiftign into 5th

35thls1ss19 · 10-03-2006, 08:56 AM

Quote:

Originally Posted by lastcall190

Hey there's the power!

jk buddy nice job, can't wait to cam my car in the spring... how hard were your poly mounts to put in (you did them yourself, right?), I'm trying them this thanksgiving break.

-J

didnt do them which i am kickin myself in the face for. I need them bad but i think i am goin to do them when i do my umi k member this winter

foff667 · 10-03-2006, 09:07 AM

what do you mean by the top of 4th?...if your cam makes peak hp at say 6400 rpms you probably would want to trap @ 6500ish.

foff667 · 10-03-2006, 09:09 AM

also remember bias ply's grow more then a radial would...so at the end of the track they might be a slightly taller tire then at the starting line.