|
03-29-2007, 04:48 PM
|
#1
|
Join Date: Aug 2004
Location: Flemington
Posts: 64
|
I think the 10 bolt finally bit it....
Drivin to my buddies house the other night I went around a right turn at like 15 mph....went to accel out of it(driving normally) and the rear made a pop and the car kind of jumped to the side. It now does this on left and right turns quite friquently....Long story short, my limited slip feels like its a locker.
I'm pullin it appart tomorrow. I'll be sure to keep everyone posted and possibly have pics of any carnage.
__________________
2001 SS, M6, black, t-tops with all kinds of mods
\"speed doesnt kill....its the sudden stop that does the job\"
|
|
|
03-29-2007, 09:42 PM
|
#2
|
NJFBOA Supporting Sponsor
Join Date: Feb 2006
Location: HULMEVILLE, PA
Posts: 2,023
|
If you catch it before it damages the gear set you might be able to get away with replacing the posi unit only.
Or you could just get a 12 bolt..
__________________
JSSPEEDANDCUSTOM.COM
|
|
|
03-30-2007, 08:26 AM
|
#3
|
Join Date: Aug 2004
Location: Flemington
Posts: 64
|
if i upgrade to anything its gonna be a dana 60 and that really isnt in the budget at this point.....drained the oil last night and it looked like anti sieze hahahah. the gear set is fine im sure, pullin out the posi tonight
__________________
2001 SS, M6, black, t-tops with all kinds of mods
\"speed doesnt kill....its the sudden stop that does the job\"
|
|
|
03-30-2007, 08:42 AM
|
#4
|
12 Second Club
Join Date: Aug 2005
Location: Toms River,NJ
Posts: 556
|
one thing nice about a Torsen, you get a warning sometimes. My Auburn unit just went Boom and I could not move.
__________________
2001 10th Anniversary FireHawk #105 of 139
2002 Fbody Nats Elimination Winner
2004 SLP Day Fbody vs Mustang Winner
2006 HP Pontiac Show n Go Elimination Winner
2006 NJFBOA Fbody vs Mustang Eliminaton Winner (Mrs. Bandit driver)
|
|
|
03-30-2007, 04:55 PM
|
#5
|
Join Date: May 2006
Location: Midland Park, NJ
Posts: 1,389
|
sounds like worn spider gears in an auburn, thats easy to fix if you gotz the tools and a new set of spiders, pull the inspection cover and check it out
|
|
|
03-30-2007, 06:10 PM
|
#6
|
Join Date: Aug 2004
Location: Flemington
Posts: 64
|
aight I'm a bit confeused now....did f-body's come from the factory with either a torsen or an auburn? or is auburn strickty aftermarket?
__________________
2001 SS, M6, black, t-tops with all kinds of mods
\"speed doesnt kill....its the sudden stop that does the job\"
Last edited by ss01layinwheel; 03-30-2007 at 06:10 PM.
|
|
|
03-30-2007, 06:42 PM
|
#7
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Quote:
Originally Posted by ss01layinwheel
aight I'm a bit confeused now....did f-body's come from the factory with either a torsen or an auburn? or is auburn strickty aftermarket?
|
If memory serves, pre 99 cars came with an Auburn and 1999+ cars came with the Zexel-Torsen differential.
|
|
|
03-31-2007, 07:29 AM
|
#8
|
NJFBOA Supporting Sponsor
Join Date: Feb 2006
Location: HULMEVILLE, PA
Posts: 2,023
|
both are junk, get an Eaton!
__________________
JSSPEEDANDCUSTOM.COM
|
|
|
03-31-2007, 12:50 PM
|
#9
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Quote:
Originally Posted by JSPERFORMANCE
both are junk, get an Eaton!
|
Well, I wasn't going to mention THAT, but... damn right!
|
|
|
03-31-2007, 10:11 PM
|
#10
|
Join Date: Aug 2004
Location: Flemington
Posts: 64
|
are torsion diffs rebuildable???? $ is kind of a factor at the moment
__________________
2001 SS, M6, black, t-tops with all kinds of mods
\"speed doesnt kill....its the sudden stop that does the job\"
|
|
|
04-01-2007, 05:25 AM
|
#11
|
Join Date: May 2006
Location: Midland Park, NJ
Posts: 1,389
|
Torsens are not rebuildable. Are you sure its a torsen? Jack the back of the car up, with the car off put the trans into 1st, make sure the e-brake is off and spin the passenger tire forward. If the drivers side tire spins the opposite direction (similar to an open rear) you have yourself a torsen. If the wheels dont spin at all, its an auburn, now take the car out of gear and spin the tire, the other tire will now spin in the same direction as the tire you are spinning. check ebay for carriers. I have one in my garage if you need it PM me
|
|
|
04-01-2007, 07:53 AM
|
#12
|
NJFBOA Supporting Sponsor
Join Date: Feb 2006
Location: HULMEVILLE, PA
Posts: 2,023
|
or, just look at it.. the auburn has their logo cast into it.
__________________
JSSPEEDANDCUSTOM.COM
|
|
|
04-01-2007, 11:30 AM
|
#13
|
Join Date: Aug 2004
Location: Flemington
Posts: 64
|
thanks fellers....looks like i gotta bite the bullet and cough up some coinage for an eaton. hopefull that will get me to december or january when i can afford a rear rear
__________________
2001 SS, M6, black, t-tops with all kinds of mods
\"speed doesnt kill....its the sudden stop that does the job\"
|
|
|
04-01-2007, 04:02 PM
|
#14
|
Join Date: May 2006
Location: Midland Park, NJ
Posts: 1,389
|
Quote:
Originally Posted by JSPERFORMANCE
or, just look at it.. the auburn has their logo cast into it.
|
that too. i was just giving options that wouldnt involve removing the inspection cover and draining the rear etc. but yes, auburns are noticably different than torsens.
|
|
|
04-01-2007, 07:12 PM
|
#15
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Quote:
Originally Posted by alamantia
that too. i was just giving options that wouldnt involve removing the inspection cover and draining the rear etc. but yes, auburns are noticably different than torsens.
|
I think he's already drained it, mentioned in a post above.
|
|
|
04-02-2007, 09:44 AM
|
#16
|
Join Date: Aug 2004
Location: Flemington
Posts: 64
|
well I took the day off work....cause there was no work hahaha....finally got around to pullin everything apart. are spider gears supposed to come out in pieces before you pull the carrier out????? I was giggling to myself as i was pulling all the shrapnel out. I'll see if i can get some pics up once i tear the carrier apart.
Ordering an eaton today or tomar.
__________________
2001 SS, M6, black, t-tops with all kinds of mods
\"speed doesnt kill....its the sudden stop that does the job\"
|
|
|
04-02-2007, 12:30 PM
|
#17
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Quote:
Originally Posted by ss01layinwheel
well I took the day off work....cause there was no work hahaha....finally got around to pullin everything apart. are spider gears supposed to come out in pieces before you pull the carrier out????? I was giggling to myself as i was pulling all the shrapnel out. I'll see if i can get some pics up once i tear the carrier apart.
Ordering an eaton today or tomar.
|
Are you planning on replacing the ring and pinion?
Last edited by WildBillyT; 04-02-2007 at 12:30 PM.
|
|
|
04-02-2007, 02:55 PM
|
#18
|
Join Date: Aug 2004
Location: Flemington
Posts: 64
|
nope...looks fine
__________________
2001 SS, M6, black, t-tops with all kinds of mods
\"speed doesnt kill....its the sudden stop that does the job\"
|
|
|
04-10-2007, 06:49 PM
|
#19
|
Join Date: Aug 2004
Location: Flemington
Posts: 64
|
finally got all my parts and threw everything back together....so far so good.
found out that the side gear that slides and engages/disengages the drivers side axle is frozen solid in the career. haha
__________________
2001 SS, M6, black, t-tops with all kinds of mods
\"speed doesnt kill....its the sudden stop that does the job\"
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|